Instructions
Swivel Bath Seat
Item # 522-9810-1900
Assembly Instructions
NOTE:
Assembly does not require any tools, but once the
parts are snapped into place, they are no longer
removable.
1. Place the seat face down on a flat surface, preferably
on the floor for stability.
2. To avoid the seat from swiveling during assembly, line
up the lock to the cutout opening and tightly twist.
3. Insert 1 leg in a slot of the seat using firm downward
pressure. Ensure that the leg snaps into place.
4. Repeat the previous step for the 2nd leg. DO NOT
insert the last leg.
5. Before inserting the last leg, take the center ring (face
down) and insert the tabs in the slots of each of the
legs.
6. Snap the last leg into the center ring tab and into the
slot of the seat.
Assembly Codes
1 – Seat (1)
2 – Center Ring (1)
3 – Legs (3)
Cleaning
Use only mild soapy water to clean your Swivel Bath Seat.
Never use corrosive or abrasive cleaners or scouring pads
as this can affect the surface.
Seat and Swivel Lock
The outer frame of the seat can be lifted off if the stool is
set in swivel position (unlocked). Please DO NOT remove
or discard the clear plastic sheet underneath the outer
frame of the seat. This allows the seat to swivel
smoothly. To lock the seat in place, line up the lock to the
cutout opening and tightly twist.
Rubber Feet
The rubber feet can be adjusted by turning counter-
clockwise. Turn all 3 feet to raise seat up to 2” of height
or adjust individually to use on uneven surfaces.
CAUTION
This product contains natural rubber latex, which
may cause allergic reactions.
Manufactured for:
Briggs Medical Service Company
1931 Norman Drive
Waukegan, IL 60085
#910-9810-1900 05/11
© 2011 Briggs Medical Service Company
Toll-Free Customer Care Help Line: 800.622.4714
Monday – Friday 8 a.m. to 6 p.m. EST
Weight Capacity: 400 lbs.
WARNING:
The rubber feet can unscrew all the way out.
We recommend only adjusting to a maximum of 2” to
keep the seat stable. Make sure each of the rubber feet
are stable before each use.
Supervision or assistance is recommended for users with
limited mobility. Keep children away from the Swivel
Bath Seat; it is not a toy. Never stand on the Swivel Bath
Seat. Inspect for wear and damage once a month; if any
parts are cracked or damaged discontinue use.
1
2
3
3
3