background image

 

GPDT-BM2_Manual_en.pdf     [rev. 002] 

- 1 - 

www.healtech-electronics.com 

GIpro  DS-series 

G

2

 

Installation and Operation Manual

 

Model GPDT-BM2

 

 
 

Before installing this product, please make sure you got the right part for your bike. See 
the part number on the packaging and use the 

Product Advisor

 on our website to check 

compatibility. 
These instructions are applicable to a wide range of motorcycles and describe the main 

install steps needed for a successful installation. You may find motorcycle specific 
Supplementary Manuals on our website. Please visit: 

     www.healtech-electronics.com/GPDT 

 
 
 

1.

 

Foreword 

Congratulations on your purchase of a GIpro DS gear position indicator. 
The GIpro products from HealTech Electronics Ltd. are the most advanced gear 

position indicators on the market today. 
This product connects to the self-diagnosis connector. It makes the installation 
very simple. Due to the advanced microprocessor and sophisticated firmware, 
the GIpro DS offers faster and more reliable readings than competing products. 
The unit is also the smallest, most compact gear indicator available, making it 

easy to mount at the instrument cluster. 
 
 

2.

 

Specifications 

-

 

Supply voltage: +8V to +24V 

-

 

Maximum supply current at 12V: 80 mA 

-

 

Reverse polarity and transient protection on all leads 

-

 

Unit size: 20 x 30 x 13 mm (0.7 x 1.2 x 0.5 inches) 

-

 

Operating temp: -40C to +80C (-40F to +176F) 

-

 

Waterproof (IP68) 

 
 

3.

 

Features 

Fast and accurate

 

Instant and accurate indication of the selected gear for added control and safety. 
The sampling period can be adjusted to make the response quicker or slower, 
depending on shift speed and signal conditions. 
 

Touch control

 

All settings can be done via the touch sensor so there’s no opening on the 
housing, it is completely sealed and encapsulated in epoxy. 
The touch sensitive area is on the TOP of the unit. However, after programming, 
the unit can be mounted even with the top side stuck to the dashboard (via the 
sticky pads supplied) and will function properly. It can also be used with the 

optional GIpro Mount. 
 

Содержание GIpro DS Series

Страница 1: ...sor and sophisticated firmware the GIpro DS offers faster and more reliable readings than competing products The unit is also the smallest most compact gear indicator available making it easy to mount at the instrument cluster 2 Specifications Supply voltage 8V to 24V Maximum supply current at 12V 80 mA Reverse polarity and transient protection on all leads Unit size 20 x 30 x 13 mm 0 7 x 1 2 x 0 ...

Страница 2: ...ed high quality components are built in Each unit is extensively tested prior to shipping guaranteed to work 100 waterproof IP68 4 Installation Find the BLACK 16 pole diagnostic connector under the seat Connect the GIpro plug and use the long cable tie supplied to secure the plugs together Route the cable to the mounting location along the frame Peel the green plastic off from the back of the unit...

Страница 3: ...to neutral Cycle the ignition key to start over To review or change a parameter use the following controls Short tap tap and release the touch sensor next menu item increasing the value Long tap hold your finger on the touch sensor until the display changes select ok 6 1 Reading the firmware version In the menu select the C sign and do a long tap After this command the firmware version number is s...

Страница 4: ... the factory defaults Filtering 3 Brightness 4 Upside down normal view 7 Cleaning the display Clean the display with wet sponge Use pure water only without any detergents Do not clean with dry cloth as it may scratch the front face Do not spray high pressure water directly on the display 8 Warranty The unit is completely sealed and epoxy encapsulated which gives extreme protection for the internal...

Отзывы: