background image

 

http://www.healtech-electronics.com

 

- 1 - 

GI

pro  

w/ATRE

 

- Electronic Gear Indicator with Advanced Timing Retard Eliminator -

 

 
 

Specifically designed for Triumph Rocket 

III (2004-2010) 

 
 
 

User’s Guide 

 
 
 
 
 

1.  Foreword 

Congratulations on your purchase of a GIpro unit. 
The GIpro from HealTech Electronics Ltd. is not only the most advanced gear indicator on 
the market, but also the best TRE device available for selected Triumph motorcycles. 
 
This product will fit Triumph motorcycles with Gear Position Sensor (GPS). 

 
 
 

2.  Warranty 

To ensure trouble-free operation from the start, all GIpro units have been extensively tested 
prior to shipment. 

Should  you  not  be  entirely  satisfied  for  any  reason,  our  dealers  are  offering  a 

30-day 

money-back guarantee

 

(all parts must be returned in original condition for full refund

)

Furthermore the product is covered by our 

2-year replacement guarantee

 from the date of 

purchase. 

(The unit should not be damaged or subjected to over-voltage.

)

 

 
Please  contact  us  in  warranty  issues  at  [email protected]  regardless  of 
the place of purchase. 

 
 
 

3.  Electrical Specifications 

-  Supply voltage: +9V to +16V 
-  Reverse polarity and transient protection on all leads 
-  Supply current in stand-by: 4 mA @ 12V 
-  Maximum supply current: 85 mA @ 12V 
 
 

Содержание GIpro w/ATRE

Страница 1: ...ble free operation from the start all GIpro units have been extensively tested prior to shipment Should you not be entirely satisfied for any reason our dealers are offering a 30 day money back guarantee all parts must be returned in original condition for full refund Furthermore the product is covered by our 2 year replacement guarantee from the date of purchase The unit should not be damaged or ...

Страница 2: ...nd emission do not activate TRE on public roads Large effective display 1 inch extra bright display housed in a compact box Simple one button operation All functions can be easily accessed with the button under the display No need to insert a separate programming key or grounding a wire like on other indicators Auto Brightness Control The brightness of the display varies with the ambient light int...

Страница 3: ...omply with regulations do not activate TRE mode on public roads 5 3 Starting the Auto Learning procedure If the display does not indicate the gears selected correctly start the Auto Learning procedure 1 If you have a stand raise the rear wheel off the ground Otherwise sit on the bike 2 Activate the display refer to section 5 1 Make sure that the engine stop switch is in RUN position Do not start t...

Страница 4: ... is desired If you decrease the Sensitivity Level in low ambient light or increase it in strong daylight you may not notice a difference in display brightness because it may be already at minimum or maximum setting If you set the level to 9 the Auto Brightness Controller will be disabled and the brightness will be always at maximum regardless of the ambient light intensity 1 Select Neutral and hav...

Отзывы: