background image

Introduction 

 
Thank you for choosing a healing HIR434 Remote Control Extender. 
 
The HIR434 Remote Control Extender is a low profile Infrared command 
repeater that utilises 434MHz wireless technology to send the Infrared 
signal from one room to another. 
 
The systems infrared Receiver and infrared Transmitter allows you to 
change channels or use almost any Remote Control function of Pay TV 
Receivers, CD Player, DVD Player, Blu-Ray Player, CCTV - or virtually any 
IR controlled device from another room. 
 

 
Features 
 

 Operate your Pay TV, CD, DVD/Blu-Ray Player, CCTV Camera,  

   Projectors or almost any AV device wirelessly from one room to another. 

.  

Allows you to use original remote control from another room. 

 Wireless transmissions passes Infrared signals through walls and over   

   distances using 434MHz. 

.  

Delivers clear IR signals

 

up to 100 metres based on clear terrain. 

 Concealed high efficiency antennas 

– inside the receiver and transmitter. 

 Infrared Emitter Extender with self adhesive pad 

– sticks to AV device IR   

   Sensor window. 

.  

LED indicates IR transmission activity. 

.

  Weighted base optimises stability of vertical small footprint case. 

.  

Meets Low Interference Potential Devices (LIPD) class licence 

 
 

 
 
 
 
 
 

Содержание HIR434










Отзывы: