healing HHT894, Руководство пользователя

Страница: 16 / 30

16
 MANUAL SCAN
1. Select the channel to scan by entering its
Centre Frequency in KHz. A list of this
data appears on page 27 at the end of this
Owner
’ s Manual. Scanning manually by
frequency enables non standard channels to
also be tuned.
Press Menu key, the “Main
Menu” will show.
2. Use the UP/DOWN ke ys to scroll to “Scan”.
3. Press the OK key to activate “Scan” sub -menu.
4. Press the LEFT/RIGHT keys to select “Manual”.
5. Press the UP/DOWN keys to select “Frequency”.
6. Press LEFT [<.<.<.<.<.<.< … ] to clear Frequency data.
7. Enter centre Frequency of channel to sca n in “KHz.”
8. Press the UP/DOWN keys to select “Start” .
9. Press OK to commence Manual Scan.
10. Program info. pertaining to the channel
scanned will display in the information box
at the bottom of the screen.
11. On completion press EXIT to return to the
“Main Menu” .
NOTE: This receiver stores Secondary transmitter or Translator channels
found by assigning a 35* prefix to each channel number.
This point is
helpful to understand as this sensitive receiver can receive channels not
intended for your area. As Secondary transmitters are provided to serve
people located in difficult reception areas a Primary transmitter can be a
more reliable source of your TV signal where possible.