healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
29
1.
Press Menu key and Main Menu page will
display.
2.
Use the UP/DOWN keys to scroll to Scan.
3.
Press the OK key to activate Scan sub
menu.
4.
Press the LEFT/RIGHT keys to select
Manual.
5.
Press the UP/DOWN keys to select
Frequency.
6.
Press LEFT [<.<.<.<.<.<.<…] to clear
Frequency data.
7.
Enter centre Frequency of channel to scan in KHz.
8.
Press the UP/D
OWN key to select „Start‟.
9.
Press Ok to commence Manual Scan.
10.
Program information pertaining to the channel scanned will display in the information
box at the bottom of the screen.
11.
On completion press EXIT to return to the „Main Menu‟
.
Note: This receiver stores Secondary transmitter or Translator channels found by
assigning a 35
# prefix to each channel number. This point is helpful to
understand as this sensitive receiver can receive channels not intended for
your area. As Secondary transmitters are provided to serve people located in
difficult reception areas a Primary transmitter can be a more reliable source
of your TV signal where possible.
Audio Mode Selection Via The Audio Key
1.
Press the AUDIO key on the remote
control and AUDIO CTL menu will be
displayed.
2.
Press the UP/DOWN arrow key to select
from Track and Output.
3.
MULAUDIO describes the Audio of the
presently tuned channel.
4.
Press the OK key to highlight the
submenu and use the UP/DOWN arrow
keys to make your selection.
5.
Push the OK key and your selection will be confirmed by a
#
symbol.
AUDIO CONTROL extinguishes after 5 seconds or by pressing EXIT.