healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
20
START UP
Once you have connected your preferred Video and Audio Outputs of the HHM897 to the
TV‟s Inputs and connected the antenna and power source, please action th
e following
Start Up procedure:
Power On the HHM897 and red LED will
appear in the units display.
For first time set up (from factory default)
a dialogue box will be displayed stating
“No valid program to be played” and
asks “start auto search now
?
”
.
You can press [Yes], or after 10 seconds
Auto Scan will begin automatically.
The receiver will scan and input TV &
Radio channels in your location and this
will take a few minutes.
Front panel LED show centre frequency of channel being scanned.
Once all channels have been scanned, the receiver will automatically revert to
normal TV viewing.
If desired, when the channels you require have been passed, press EXIT key -
alternatively let the receiver complete its total auto scan.
Main Menu
Many of the set up functions explained
throughout this operational manual are
actioned via the Main Menu.
1.
Select Main Menu by pressing the MENU
Key on the remote control.
2.
Main Menu page will display: TV Channel,
Radio Channel, Scan, Edit Channel,
Settings and System Information.
3.
Use the UP/DOWN arrow key on the
remote control to scroll to each Menu item.
4.
Press the OK key on the remote control to activate the menu selected.
