healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
16
Connector: S-Video.
You will require a separately purchased S-Video Lead.
a. Connect the S-Video lead to the S-Video connector on the rear of the receiver and to
the S-Video connector on your TV.
b. Connect the antenna lead to the ANTENNA IN connector on the rear of the receiver.
c. AUDIO: You will need to make separate connections for Audio as follows:
1. Using the supplied RCA AV lead; Yellow, Red, White connectors; connect the Red
connector to the Red RCA audio socket on the rear of the receiver (Right Audio) and the
White connector to the White RCA audio socket on the rear of the receiver (Left audio).
2. Connect both leads to the corresponding Left and Right RCA audio sockets on your TV.
Note: For audio you can choose to use the Optical S/PDIF or Coaxial digital audio
connections to your decoder amplifier.
d. Connect mains power to the back of your receiver using the supplied IEC C7 figure 8
power lead.
