healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
15
Connector: YPbPr Component
You will require a separately purchased YPbPr Component Lead.
a. Connect Component lead (Red, Green, Blue connectors) to the HHM897 YPbPr
connectors on the rear of the receiver and to the corresponding YPbPr Component
connectors on your TV.
b. Connect the antenna lead to the ANTENNA IN connector on the rear of the receiver.
c. AUDIO: You will need to make separate connections for Audio as follows:
c1. Using the supplied RCA AV lead; Yellow, Red, White connectors; connect the Red
connector (Right Audio) to the Red RCA audio socket on the rear of the receiver and the
White connector (Left Audio) to the White RCA audio socket on the rear of the receiver.
c2. Connect both leads to the corresponding colour coded Left and Right RCA audio
sockets on your TV.
Note: For audio you can choose to use the Optical S/PDIF or Coaxial digital audio
connections to your decoder amplifier.
d. Connect mains power to the back of your receiver using the supplied IEC C7 figure 8
power lead.
