healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
12
PREPARING THE REMOTE CONTROL FOR USE
Fresh batteries must be loaded for your remote control unit to operate reliably.
1.
Open the battery compartment lid on the back of the RCU.
2.
Insert the batteries, negative terminals first. Take care that the battery polarity
markings correspond with those of the remote control.
3.
Close the battery compartment lid, checking that it locks in place.
4.
Your RCU should now be ready for use.
REMOTE CONTROL OPERATING DISTANCE & ANGLE
With an uninterrupted view of your receivers Front panel
IR window, point the RCU towards Your receiver and
press any key.
1.
Distance: The remote control should work up to 7
meters from the front of your receiver.
2.
Angle: and about + or
–
30 degrees from directly
facing the receiver (see drawing).
USEFUL TIPS
1.
For prolonged receiver life, intervals of continuous switching action should be kept to
less than one minute.
2.
Should receiver stop responding to RCU commands or freeze up, disconnect the
batteries and or power for 10 seconds and restart.
3.
Daylight and some electric light can compromise the distance over which an RCU is
effective. You can solve this by re-adjusting receiver position and room lighting as
necessary.
