
INTRODUCTION
You can use this item with any compatible, Bluetooth
®
-enabled device to stream music and
enjoy hands-free calling. In order to get the best results when using this device, please read
this manual first before using. This unit has IPX 5 rating: Protected against low-pressure water
jets from all directions.
OPERATION
TO
DO THIS
LED
Power ON
Press and hold the
button.
Blue LED ON.
Power OFF
Press and hold the
button.
Blue LED OFF.
Pair
Blue LED flashes to
indicate pairing mode.
Disconnect
Press the + and - buttons
simultaneously.
Blue LED flashes.
Play/Pause/Mute
Press the
button to play, press
again to resume.
Next track
Press and hold the button.
Previous track
Press and hold the button.
Increase volume
Press the button.
Decrease volume
Press the button.
Answer call
Press the
button.
End call
Press the
button.
Reset
Insert the end of a paper clip into
the reset hole.
PAIRING
1. Turn the speaker ON.
2. Turn the Bluetooth
®
ON in your device settings and select “HRSP 5024”.
3. Once paired successfully, speaker will chime and the blue LED will blink quickly.
4. If you fail to pair your device or you want to pair it with a new device please repeat the
steps outlined above.
NOTE: The speaker will automatically pair with previously paired devices provided the
Bluetooth
®
is ON and within range (10m).
When you disconnect the speaker while paired, the blue LED light will start to blink quickly
and the speaker will chime. The speaker has entered into pairing mode. If there is no device
paired within 5 minutes, the speaker will turn OFF.
CHARGING
This speaker has a built-in rechargeable Li-Ion battery.
Fully charge the speaker before first
use.
Charge the battery as follows:
Use the included charging cable to fully charge the speaker before first use. It will take
approximately 2.5 hours to fully charge using a PC USB port.
• The red LED will be ON while the speaker is charging
• The green LED will turn OFF once charging is complete
NOTE:
When the battery is at 10% the red LED will flash quickly, at 3% the speaker will
turn OFF.
USING THE POWER BANK
1. The unit has a charging out feature to support your portable devices with a back-up power
supply.
2. Connect your portable device by its charging cable to the USB port.
3. Press the button.
Green LED ON= 67-100% battery life.
Orange LED ON=34 - 66% battery life.
Red LED ON=less than 33% battery life.
The charging current is 2.1A max
HANDS-FREE SPEAKERPHONE
When a smartphone is connected to your speaker follow the steps below to take calls
hands-free.
1. If there is an incoming call while streaming music, the speaker will beep to notify you.
2. Press the button to pick up the call; press the button again to hang up the call.
3. Press and hold the button for one second to reject the call.
4. To return a call, press and hold the button.
LINE-IN
1. Use the supplied 3.5mm cable to connect the speaker directly to your device.
The Bluetooth
®
will disconnect and the speaker will play music from LINE-IN. The green LED
will be ON when playing music using line-in.
TWS (TRUE WIRELESS STEREO) CONNECTION
Connect two HR Maximus speakers for a true wireless stereo experience. To connect:
1. Turn the Bluetooth
®
feature on your smartphone OFF and ensure neither speaker is
connected to any device via Bluetooth
®
.
2. Turn both speakers ON and place within 7m (22.9ft) of each other. Press the button
on one of the speakers twice the LED will flash blue and green and they will pair
automatically. After successful pairing, the blue LED on the main speaker will flash slowly
and the blue LED on the second speaker will turn ON.
3. Turn the Bluetooth
®
ON in your device settings and select “HRSP 5024”. After pairing to
your phone, both blue LEDs will stay ON.
4. To disconnect, press and hold the
button
.
TECHNICAL SPECIFICATIONS
Carrier Frequency:
Bluetooth
®
4.2
Battery capacity :
7.2V, 2000mAh
Frequency Response: 65Hz-20kHz
Operation Distance:
Up to 10m (33ft.)
Output Power:
2 x 10W
Impedance:
8 Ohms
Charging time:
2.5 hours
Playback time:
8 hours
NOTE:
This speaker is in compliance with the specified Bluetooth
®
version. It does not
guarantee compatibility with all the functions on every Bluetooth
®
-enabled device. Please
check your mobile phone’s user manual for compatibility and functionality.
TROUBLESHOOTING
No Sound:
• Ensure the speaker is charged and has enough battery power for operation
• Ensure the speaker is switched ON
• Ensure Bluetooth
®
device is ON
• The volume of the speaker is too low, adjust the volume to an appropriate level
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
THE FCC WANTS YOU TO KNOW
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
The device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
WIRELESS SPEAKER
MAXIMUS
HRSP 5024
8084182
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
®
SIG, Inc. and
any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and
trade names are those of their respective owners.
WHAT’S INCLUDED:
• Bluetooth
®
speaker
• USB to micro USB
charging cable
• 3.5mm to 3.5mm
audio cable
• Instruction Manual
FEATURES:
1. Bluetooth
®
V4.2
2. Hands-free telephone calling
3. TWS (True wireless stereo)
4. Operating distance up to 10m (33ft.)
5. Operation time up to 8 hours
(medium volume level)
6. 3.5mm line-in
7. IPX 5 water-resistant feature
8. Convenient adjustable strap
9. Internal power bank for charging
smartphones or other electronic
devices
COMPONENT IDENTIFICATION
1. MIC
2. Battery indicator LED
3. Status indicator LED
4. Power ON/OFF
5. Decrease volume/Previous track
6. Play/Pause
7. Increase volume/Next track
8. Power bank charging port
9. AUX
10. Reset hole
11. Micro USB