HE-VA Top-Cutter Solo, Инструкция по эксплуатации, список запасных частей, декларация соответствия

Страница: 9 / 28

UK Top-Cutter 3,0 - 3,5 - 4,0 - 5,0 - 6,0m rigid/hydraulic 01-04-2021
9
Back to the table of contents
Maintenance
After 10 hours of operation, tightening of wheels, bearings and stop rings must be done. If
this is not respected our warranty will lapse.
Maximum torque in Nm. w/lubricated thread
Metric thread Quality 8.8 Quality 10.9 Quality 12.9
M10x1,5 47 65 79
M12x1,75 81 114 136
M14x2,0 128 181 217
M16x2,0 197 277 333
M18x2,5 275 386 463
M20x2,5 385 541 649
M22x2,5 518 728 874
M24x3,0 665 935 1120
Hub bolts M18x1,5 fine thread 433 Nm
Hub bolts M22x1,5 fine thread 803 Nm
Eventually damages at the paint must be repaired at least once in the season. This will
preserve and make the machine stay in a good condition for many years.
•
On foldable models the cylinder bushings and hinge joints must be greased at every 20 hour
of operating
•
Bearings at the rollers twice a year and after every machine wash.
Disposal
When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of
to a registered and approved product dealer. This will carry out the statutory discharge and disposal
of hydraulic oil, as well as sorting materials for further processing for recycling.