HE-VA Disc-Roller Contour, Руководство по эксплуатации

Страница: 5 / 72

Disc-Roller Contour 4,5 – 5,5 – 6,5 m 20-09-2020
5
Back to the table of contents
Safety Instructions for Disc-Roller Contour
Do not start-up the machine if there are persons in exposed positions** within a hazardous area*.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance,
attachment and uncoupling), the following conditions must be observed:
•
The machine must be lowered to firm ground.
•
The hydraulics must be relieved.
•
The tractor must be stopped and the key removed from the ignition switch.
•
The driver must ensure that no persons are staying in exposed positions during the
operation.
*
Hazardous area: On and under the machine within a distance of 4 m from the machine.
** Person in exposed position: Any person who is staying wholly or partly within a
hazardous area.
Most accidents that happen in connection with the operation, transport and maintenance of
machines are caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety
instructions as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this
work and who are further familiar with the possible elements of danger with this particular machine.
Instructions on Unloading and Placing
The machine is supplied completely assembled by our lorry. Our specially trained drivers will assist
in the unloading of the machine.
The machine must be driven from the lorry by means of a tractor on the ramps provided and
according to our driver's instructions.
Afterwards place the machine on level and firm ground.
ATTENTION !! Rotary parts and loose clothes are a dangerous combination.
IMPORTANT !!
In connection with the risk of parts falling down, it may endanger the
lives of persons staying on the base frame of the machine, when it is
operated attached to a tractor.