4x4 HDMI 2.0 HDBaseT Matrix Switcher
34
Remote
IR Receiver
IR:
HDMI:
HDBaseT:
AUDI O MATRIX OUT / ARC
IR E YE
HDCP LINK
IR Emitter
Tx Rx
4K Blu-Ray
Receiver
7.2 IR Pass-through Control
The matrix switcher supports bi-directional IR pass-through, allowing the devices can
be controlled by both source and destination ends. This section provides connection
and switching examples to illustrate possible configurations.
7.2.1 Control Local Input Device from Local
By default, there is a one-to-one correspondence between the IR OUT port on the
matrix switcher and the HDMI input. When switch an HDMI input, the corresponding IR
OUT will be switched synchronously.
Example: Switch HDMI input 3 to HDBaseT output 4.
Connect an IR receiver to the
IR IN 4
port, and an IR emitter to the
IR OUT 3
port, the
connection diagram shown as below:
Display
