HBS 94-31-412C Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 62

HBS 94-31-412C Скачать руководство пользователя страница 50

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

50

13 Maintenance and Care

13

Maintenance and Care

Electric shock hazard

Never perform maintenance and care on your welding head if it is still

connected to the stud welding unit.

First unplug the welding head on the stud welding unit.

Danger from insufficiently qualified operating personnel

Carry out only the work described here on your welding head.

Repairs may only be carried out by appropriately qualified personnel.

Inform your dealer or your maintenance department.

13.1 Cleaning

Clean the casing of your welding head with a slightly damp cloth if necessary.

Do not use solvents for cleaning.

These can damage the used plastic components.

Switch the mains switch of the stud welding unit off and unplug the welding

head before cleaning the automatic welding head.

Do not use compressed air for cleaning.

Flying dust particles could be inhaled.

The following maintenance recommendations cannot account for the unique situati-

on at your site.

For this reason, you should create in-house maintenance instruc-

tions.

«
...
48
49
50
51
52
...
»

Содержание 94-31-412C































































Отзывы:

Нет отзывов