HBS 94-31-412C Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 62

HBS 94-31-412C Скачать руководство пользователя страница 45

45

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

10 Preparing the Welding Head

Adjusting the lift

Remove the rear cap.

I

Set the lift according to your welding parameters (e.g., lift = 3.5 mm).

To do this, push the motion unit (I) upward to the stop block.

The current lift appears on the display as a negative value.

-3.00

D

Now turn the lift adjustment screw D to the value that is to be set.

The set value appears on the display as a negative value.

-3.50

Mount the rear cap.

The lift must be checked following each change of workpiece or stud.

When adjusting the lift, take the notices from chapter

10.2 Adjusting

the Working Position - Determining the protrusion (see page 25)

into account

.

Before starting work, always check the automatic welding head for ease of move-

ment of the function unit by manually deflecting the chuck in the axial direction.

Remove weld spatter from the chuck and slot piston.

«
...
43
44
45
46
47
...
»

Содержание 94-31-412C































































Отзывы:

Нет отзывов