HBS 93-10-1552A Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 64

HBS 93-10-1552A Скачать руководство пользователя страница 45

45

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

12 Welding

Danger due to noise

Wear your ear protectors during welding.

Observe furthermore your working instructions and the accident preventi-

on regulations.

Inform colleagues working in the immediate vicinity accordingly before

starting work.

A > 90 dB (A)

bang can occur during the welding process.

Ensure that the welding gun has been prepared in accordance with the

corresponding operating manual.

Check whether a welding element has been inserted into the welding

gun.

Insert a welding element, if necessary.

Place the welding gun perpendicularly onto the workpiece as soon as the

power unit is ready for the welding process.

Press the welding gun firmly with both hands against the workpiece until

the welding gun attachment (spacer) is resting uniformly on the work-

piece.

Hold the welding gun firmly, steady and straight.

Ensure that you do not touch any metal parts of the welding gun.

Only now should you press the button of the welding gun.

The welding process is started.

Always pull the welding gun perpendicularly away from the welding

element after the welding process

.

If you pull the welding gun away at an angle, you will strain the chuck and

shorten its service life.

«
...
43
44
45
46
47
...
»

Содержание 93-10-1552A

































































Отзывы:

Нет отзывов