HBS 92-10-1504B Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 62

HBS 92-10-1504B Скачать руководство пользователя страница 32

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

32

11 Connection

If you are using a

fully automatic stud feeder

, connect the compressed

air output of the feed unit to the compressed air input of the stud welding

unit.

Refer here to the operating manual of your feeding unit.

You can set the operating pressure of max. 6 bars with the pressure

reducing valve of the feeding unit. In the filter unit, the compressed air

is cleaned and drained.

11.4 Connecting the Ground Cable

Connect the ground cable

Plug the ground cable into the corresponding socket of the

stud welding unit.

Press in the plug and turn it firmly clockwise (to the right).

Only loosely made connections will result in damage to the plug con-

nectors.

Therefore always check that the plug connector is firmly inserted.

This prevents a poor contact and hence overheating of the plug connectors.

«
...
30
31
32
33
34
...
»

Содержание 92-10-1504B































































Отзывы:

Нет отзывов