HBS 92-10-1504B Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 62

HBS 92-10-1504B Скачать руководство пользователя страница 14

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

14

6 Intended Use

6

Intended Use

Our stud welding units are designed and built exclusively for industrial use. Nonin-

dustrial use is expressly forbidden due to the lack of know-how about the welding

technology employed and the applicable standards.
The stud welding unit is intended exclusively for stud welding of standardised wel-

ding elements. Any other use will result in the desired strength of the welded joint

being reduced.
This stud welding unit can only be used with the HBS stud welding guns C 08,

CA 08, CI 03 and PAH-1 as well as the automatic stud feeder VBZ-3.
The intended use also implies observance of the operating manual of the compo-

nent used and compliance with the intervals and conditions for inspection and main-

tenance of the stud welding unit and the components employed.

Always check the operating manual of your stud welding gun whether it may be

used with this stud welding unit.

The stud welding unit must be suitable for welding the welding elements in use.

Welding elements manufactured with the cold formed process have a flange and an

ignition tip. During welding, the flange prevents the arc getting to the cylindric part of

the welding element and increases simultaneously the welding area.

Please refer to the operating manual of your stud welding gun for

detailed information on which welding elements may be used.

«
...
12
13
14
15
16
...
»

Содержание 92-10-1504B































































Отзывы:

Нет отзывов