HBM WTX110, Руководство по эксплуатации

Страница: 134 / 436

Supervisormode
132
A4774-1.0 HBM: public
WTX110
Min. Start w., Crs.fl.off, Crs. Monitor, Fine fl.off, Fine
monitor, Min.Fine fl., Lower tol., Upper tol., Syst.diff.,
Max.dos.t(s), Tare delay(s), Start Fine(s), Crs.mon.(s),
Lockout crs(s), Fine mon.(s), Lock fine(s), Dos.delay1(s),
Dos.delay2(s), Residual(s), Stabilizat.(s), Empt.time(s), Reset
statistic, No.of dosing, Total weight, Mean value, Std.Dev.
Information
The
Products
group only appears when
Application: Filler
has been set
in
ServiceMode/Application/GeneralSetup/Application:Filler
.
10.2.1 Edit / Load from USB / Save to USB
Information
The WTX110 must be equipped with a USB port for this function.
K-WTX110-*-***-**- USB -**-***-**
Before the data can be edited, you must decide whether to edit one of the
existing data sets, upload other data sets from the USB stick for editing, or
save the data sets to the USB stick.
Menu Key Function/Secondary selection
Products
1 Edit 1 Edit Edit existing data sets
2 Load from USB Load data sets from the USB
stick
3 Save from USB
Save data sets to the USB
stick