HBM WTX110, Руководство по эксплуатации

Страница: 118 / 436

Application
116
A4774-1.0 HBM: public
WTX110
Level (
GWn Level
)
In Above level mode, the level specifies what threshold value must not be
exceeded. If the threshold is exceeded, the relevant limit switch status is set.
The limit is then likewise set on a preconfigured digital output
(e.g.
output 3 GW1 ).
As soon as the level falls back below the threshold, the limit switch status is
reset.
Hysteresis (
Hysteresis
)
In Above level mode, the hysteresis specifies the amount by which the level
must undershoot the threshold for the limit switch status - and so also the
digital output - to be reset
.
8.2.2 Mode Below level ( Below level )
Weight
Time
Output
Level
Hysteresis
Level ( GWn Level )
In Below level mode, the level specifies what threshold value must not be
undershot. If the threshold is undershot, the relevant limit switch status is set.
The limit is then likewise set on a preconfigured digital output
(e.g.
output 2 GW4
).