HBM WE2108 Series, Справочное руководство

Страница: 61 / 72

61
WE2108
HBM A1632-2.0 en
The value added is always the display value, switchover gross/net is possible
between several summands! The sum of all values as well as the number of
summands is stored.
It is not possible to subtract the most recent value!
A maximum of 21000 values are added. This ensures that even for the maxi-
mum value of each summand (99999) no overflow of the sum is possible.
Individual values as well as sums may be negative, but only for values with up
to 9 digits (due to printout requirements: 15 characters *−123456,789 kg).
When the limits are exceeded, adding stops. Instead of the sum, the following
note is printed:
Sum Overflow
Not added
Instead of AddEd the error message Err15 appears in the display.
7.7.4 Deletion of the sums
For deletion there are two options:
•
in the menu Add , menu item ”cLr_t”, deletion must be confirmed again by
pressing ENTER . With an active print function, the sum is printed again
before deletion (without the current measured value).
•
via the interface (command csn)
Also, the sum is always deleted if by any changes in the scale parameters the
values to be added no longer fit the existing sum.
This occurs in the following cases (without any repeat printout of the sum):
•
Changes in the menu CAL
•
The commands CAP, LWT, LVA, (SFA, TMI, TMP)
•
The command LGC and subsequent storage with TDD1
•
The ”dEfLt”−function in the menu FACt
7.7.5 Summing function during counting scale operation
If the function ”counting scale” in the WE2108 has been generally approved
(parameter ”tYPE” = 0, menu
Func ), the summing function only acts on the
counting results. Weight values cannot be added. However, even in this mode
of operation, the scale can indicate weight values, only by referencing (double
key operation) will the display change over to the number of pieces / items.
For the summing function, the following applies:
If ”tYPE” is set to 0, only quantities (number of pieces) are added which are
also indicated in the display. If a summing is requested during a weight indica-
tion, the following occurs: