HBM MP70DP, Руководство по эксплуатации

Страница: 18 / 76

PME-MP70DP
18
A0658-7.3 en HBM
4.2 Supply voltage and control inputs/outputs
With the MP70DP, two removable plug terminals are available for connection,
and with the S7 versions, there are four plug terminals.
0 V
SYN
L H
Plug terminal 1
Connecting the voltage
supply:
The MP70DP module must be connected to an external
supply voltage of 18-30 V (24 V
nom
).
WARNING
D
Twist the voltage supply cable terminations and attach wire
end ferrules.
D
Screw the cable terminations to plug terminal 1.
D
Insert the plug terminal into the top socket.
D
Switch on the voltage supply.
ATTENTION Should the mains power fail in the MP70DP module, all control
outputs will be set to 0 V.
24 V
Labeling
Plug terminal 2
Analog OUT
"
10 V
"
20 mA
4 - 20 mA
IN1
IN2
IN3
IN4
0 V
24 V
OUT1
OUT2
OUT3
OUT4
Plug terminal 3
*)
Plug terminal 4
*)
IN 1-4 = digital input
For more detailed information on inputs and outputs, see chapter
‐, page 8.
Labeling
Labeling
*)
for MP70DPS7 and MP70S7 only
OUT1-4 = digital output
Fig. 4.1: Plug terminal assignment
The plug terminals are coded, to prevent confusion when plugging them into
the 2 (4) sockets. The sockets are fitted with coding tabs, the plug terminals
with coding pins.