HBM ML77B, Руководство по эксплуатации

Страница: 27 / 60

Profibus
ML77B
A00760_09_E00_00 HBM: public
27
11 DiagChn12 Error condition of channel 12
12 DiagChn13 Error condition of channel 13
13 DiagChn14 Error condition of channel 14
14 DiagChn15 Error condition of channel 15
15 DiagChn16 Error condition of channel 16
9.1.2 Measured values
Measured values can be transmitted in different formats such as IEEE float,
Siemens float (4 bytes), 16-bit fixed point number (16-bit integer as two's com­
plement, decimal point position must be signalled to reading device) or 32-bit
fixed point number (32-bit integer as two's complement, decimal point position
must be signalled to reading device) (also see chapter Parameterisation ). For
converting the values into fixed point format, the number of decimal places
must be specified in the parameterisation telegram.
9.1.3 Channel status for 1-channel device
Mode0
Bit Name Meaning
0 GW1 Status of limit switch 1
1 GW2 Status of limit switch 2
2 GW3 Status of limit switch 3
3 GW4 Status of limit switch 4
4 BRT OVLD Gross value overload
5 NET OVLD Net value overload
6 CAL_ERR Calibration error or other error in channel
7 CHANGE Changed scaling of measured values
8 PAR1 Active parameter set bit 1
9 PAR2 Active parameter set bit 2
10 PAR3 Active parameter set bit 3
11 PAR4 Active parameter set bit 4
12..14 Res Reserved
15 MODE 0