HBM M408, Руководство пользователя

Страница: 4 / 44

4
M408, M416
HBM
A2400-1.1 en/de
Safety instructions
Appropriate use
The multiplexer is to be used exclusively for measurement tasks and directly
related control tasks. Use for any purpose other than the above is deemed to
be inappropriate.
In the interests of safety, the device should only be operated as described in
the Operating Manual. It is also essential to comply with the legal and safety
requirements for the application concerned during use. The same applies to
the use of accessories.
General dangers of failing to follow the safety instructions
The multiplexer corresponds to the state of the art and is failsafe. The device
may give rise to remaining dangers if it is inappropriately installed and
operated by untrained personnel.
Any person instructed to carry out installation, commissioning, maintenance or
repair of the device must have read and understood the Operating Manual
and in particular the technical safety instructions.
Remaining dangers
The scope of supply and performance of the multiplexer covers only a small
area of measurement technology. In addition, equipment planners, installers
and operators should plan, implement and respond to the safety engineering
considerations of measurement technology in such a way as to minimize
remaining dangers. Prevailing regulations must be complied with at all times.
There must be reference to the remaining dangers connected with
measurement technology.
In this Operating Manual, remaining dangers are pointed out using the
following symbols:
Symbol:
DANGER
Meaning: Maximum danger level
Warns of an imminently dangerous situation in which failure to comply with
safety requirements will result in death or serious physical injury.