HBM K3607, Руководство по эксплуатации

Страница: 10 / 30

Connections
8
A0833-3.1 HBM: public
K3607
4 Connections
The connector cable between the calibration instrument and the measuring
amplifier is connected either to the 7‐pin Amphenol connector MS 3102
A16S‐1P (St1) or to the 5‐pin S3 (Bu 1 . . . Bu 5).
The contact assignment is shown in Fig. 6.1. The Amphenol connection is pro­
vided for a six‐wire circuit. If the intention is to connect a six‐wire circuit to the
pin terminals, connections C and F on the measuring amplifier must both be
connected to Bu3 on the calibration instrument, and connections B and G must
both be connected to Bu2.