background image

14 

Syntax 

irf member 

member-id

 

renumber 

new-member-id

 

undo irf member

 

member-id

 

renumber 

Default 

IRF member ID is 1. 

Views 

System view 

Predefined user roles 

network-admin 

Parameters 

member-id

: Specifies the ID of an IRF member, in the range of 1 to 10.  

new-member-id

: Assigns a new ID to the IRF member, in the range of 1 to 10.  

Usage guidelines 

 

CAUTION: 

IRF member ID change can cause losses of member ID-related configurations at reboot, including settings
on physical interfaces. 

 

To have the new ID take effect, you must reboot the IRF member.  
When adding a device into an IRF fabric, you must assign a unique IRF member ID to the device. If its IRF 

member ID has been used in the IRF fabric, the device cannot join the IRF fabric.  
Plan IRF member ID assignment before setting up an IRF fabric, and change member IDs before 

configuring any other features.  
Interchanging member IDs between IRF member devices might cause undesirable configuration changes 

and data loss. For example, the IRF member IDs of Device A and Device B are 2 and 3, respectively. After 

you interchange their member IDs, their port settings also interchange. 
After an IRF fabric is formed, make sure you understand the impact of the member ID change on the 

network. 

Examples 

# Change the ID of an IRF member from 1 to 3.  

<Sysname> display irf 

[Sysname] irf member 1 renumber 3 

Warning: Renumbering the member ID may result in configuration change or loss. 

Continue?[Y/N]:Y 

irf-port 

Use 

irf-port

 to enter IRF port view. 

 

Use 

undo irf-port

 to remove all port bindings on an IRF port.  

Syntax 

irf-port 

member-id

/

port-number

 

Содержание H3C S5130-E Series



































Отзывы: