HB-THERM CLEAN-5 Скачать руководство пользователя страница 19

Страница: 19 / 97

HB-CL2

Cleaning Unit

Safety

O8305-EN 2022-01

2.6 Safety devices

WARNING!
Malfunctioning safety devices may pose a fatal
risk!

Safety devices must be intact in order to guarantee
safety.

Therefore:
– Never disable safety devices.
– Take care to ensure that safety devices such as

main switch are always accessible.

Main switch

Fig. 1: Main switch

The power supply to consumers is cut and an emergency stop is
triggered by turning the main switch to the "0" position.

WARNING!
Danger of fatal injury from live conductors!

After switching off the unit via the main switch,
there are still live conductors in the unit!

Therefore:

– For all work on the electrical system, for

maintenance, cleaning or repair work,
disconnect from the mains or disconnect all
phases of the external power supply and secure
them against being switched on again

– Check unit is isolated from power supply

WARNING!
Danger of fatal injury from uncontrolled
restarting!

Premature uncontrolled restarting can lead to
severe personal injury or to death!

Therefore:

– Before restarting, make sure that the cause for

the emergency stop is eliminated and all safety
devices are installed andoperational.

Содержание CLEAN-5


































































































Результаты поиска

Содержание CLEAN-5

Отзывы:

Похожие инструкции для CLEAN-5

Бренды по названию

Популярные бренды

HB-THERM CLEAN-5, Инструкция по эксплуатации

Результаты поиска

Содержание CLEAN-5

Отзывы:

Похожие инструкции для CLEAN-5

Бренды по названию

Популярные бренды