Hazet 4926-1/36, Руководство по эксплуатации

Страница: 9 / 16

GB
USA
9
Please lubricate the threaded spindle before each use!
1. General Information
• Please make sure that the user of this tool carefully
reads these operating instructions and fully under-
stands all information given before it is used.
• These operating instructions contain important
advice that is necessary for a safe and trouble-free
operation of your Pressure Piece Set.
• For effective use of the Pressure Piece Set as
intended, it is essential that all safety and other
information in these operating instructions is
adhered to.
• For this reason, always keep these operating in-
structions together with your Pressure Piece Set.
• This tool has been designed exclusively for specifi c
applications. HAZET emphasizes that any modi-
fi cation to the tool and/or use on an application
not detailed to its intended application are strictly
forbidden.
• HAZET will not be liable for any injuries to persons
or damage to property originating from improper
application, misuse of the tool or a disregard of the
safety instructions.
• Furthermore, the general safety regulations and
regulations for the prevention of accidents valid for
the application area of this tool must be observed
and respected.
2. Explanation of Symbols
Attention: Please pay attention to these symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool set is obliged to
observe the operating and safety instruc-
tions and should ensure that all users of
this Pressure Piece Set use it according
to the information given.
NOTICE!
This symbol marks advice which is helpful
when using the tool.
CAUTION!
This symbol marks important specifi cations,
dangerous conditions, safety risks and
safety advice.
ATTENTION!
This symbol marks advice which if dis-
regarded results in damage, malfunc-
tion and/or other functional failure of
the tool.
3. Liability and Warranty
• Any deviation from the intended use
and/or any misapplication of the tool set
is not allowed and will be considered as
improper use.
• Any claims against the manufacturer and/or its
authorized agents because of damage caused by
improper use of the tool set are void.
• Any personal injury or material losses caused by
improper use of the tool set are the sole responsibil-
ity of the owner.
4. Spare Parts
• Only use the manufacturer’s original
spare parts.
• Unsuitable or defective spare parts may cause
damage, malfunction or total failure of the tool.
• The use of unapproved spare parts will void all
warranty, service and liability claims as well as all
claims for compensation against the manufacturer
or its agents, distributors and sales representa-
tives.
5. Disposal
• For disposal, clean tool set and disassemble it
according to the regulations for work safety and
environmental protection. Components can be
recycled.
• Metal components can be scrapped.
1
For Your Information