HazeBase piccola, Руководство пользователя, Страница: 8 / 21

pi cc ola
4. Preparation
4.1 Selecting the location
The location at which the Pi cc ola is operated must
●
have good ventilation behave
●
free of vibrations and shocks
●
a non-flammable surface that is
●
far enough away from easily flammable objects
●
an ambient temperature between 5 ° C and 45 ° C
4.2 Filling the tank
1. If necessary, remove the two XLR plugs
2. Push the sleeve of the quick coupling (6) in the direction of the tank. The
plug-in socket (7) is then unlocked and can be removed from the quick
coupling.
3. Remove holder.
4. Unscrew the tank from the tank cap and fill it with original Base B fluid.
Make sure that no dirt gets into the tank. The suction strainer may have to
be cleaned.
5. Slide the tank back into the tank holder.
6. Insert the plug-in socket (7) back into the quick coupling (6). When this
locks, a distinct "click" sound be heard.
4.3 Hose
The Pi cc ola is supplied with a hose cover for 15mm hoses. Please only use hoses that
can handle the temperatures. The hose cover is held by a magnet on the device. The
protruding ring on the hose cover is used for centering. This fits exactly into the mist
exit hole on the device.
The longer the mist duration is through the hose, the hotter the hose and the quality
of the mist decreases (becomes increasingly grayish). Small ventilation holes in the
hose directly on the hose cover can help improve this effect. Nevertheless,
condensation inevitably forms in the hose, which must be removed after each use.
7