
pi
cc
ola
5.7 Machine information
In the “Info” menu item, the serial number and the
firmware version of the Pi
cc
ola can be read.
6. The battery pack
The supplied battery pack contains a maintenance-free 12V lead-gel battery. This can
be used independently of the location. The Pi
cc
ola is connected via a 4-pin. XLR
connector. The charger is connected via a low voltage socket.
When used properly, the battery retains its capacity for several years and has several
hundred charge / discharge cycles.
6.1 Changing the battery pack
To change the battery pack, first disconnect the battery from the device (4-pin XLR
plug). Then disconnect the hose connection to the tank and remove the tank from the
battery pack.
Now loosen the two knurled screws (3) and remove the device from the battery pack.
Mount the new battery pack in reverse order.
6.2 Handling the battery pack
The lead gel battery is a robust energy storage device that requires little care and
maintenance. Nevertheless, incorrect use and storage can greatly reduce the service
life.
Therefore: Never discharged battery store!
As a result, the battery can lose a large part of its capacity within a few weeks. If the
battery is stored for a longer period, it must be recharged regularly (at least every 6
months).
For safety reasons, always disconnect the battery from the device during
transport.
12
Содержание piccola
Страница 1: ...Manual ...
Страница 6: ...piccola 3 Designation of the parts Front Rear view 5 ...
Страница 7: ...piccola Top view battery pack 6 ...
Страница 21: ...piccola 20 ...