USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
TriStar Variable Speed Pump
30-LITINSB004 Rev-B
Page 7
8
8 8 8 8
V1
V2
V3
Power
Initial Startup
After plumbing and connection is complete, the VSD must be configured prior to use. When power is applied to the
drive the four informational screens below are displayed in order from left to right.
-
0
V1
V2
V3
Power
P
r
V1
V2
V3
Power
-
r 2 0 -
V1
V2
V3
Power
This is shown on the
screen when the pump is
powered up.
This is the second screen
displayed and shows the
motor software revision.
This screen is only
displayed If Prime Mode
is activated.
When Prime Mode is
active this screen ramps
up to 3000rpm with
a rotating circle in block 1
Note:
If the Prime Mode is disabled, after informational screens 1 and 2 the standard running screen for speed V3
will be displayed bypassing informational screens 3 and 4.
By pressing the
DISP/FUNC
button during the Priming Cycle you will be able to scroll through the screens shown
below in order from left to right.
-
3 0 0 0
V1
V2
V3
Power
-
0
V1
V2
V3
Power
P
V1
V2
V3
Power
P
r 2 0 0
V1
V2
V3
Power
8 0
3 0 0
This is the screen that
is automaticly displayed
for Prime Mode and is
displaying pump rpm.
Press DISP/FUNC button
once and the Prime Time
remaining is displayed
with the time decreasing.
Press DISP/FUNC button
again and the power
being used is displayed
in Watts (±10%).
Press DISP/FUNC button
again and the display
returns to the first
screen showing rpm.
Once the Priming Cycle has finished and the pump is operating in any speed from V1 through V3 by pressing the
DISP/FUNC
button you will be able to scroll through the screens shown below in order from left to right.
3 0 0 0
V1
V2
V3
Power
0
V1
V2
V3
Power
P
V1
V2
V3
Power
h
5 0 0
V1
V2
V3
Power
5 0
3 0 0
1 4
This is the default rpm
screen for speeds V1, V2
and V3 displaying real
time rpm.
Press DISP/FUNC button
once and the time
remaining for that speed
is displayed.
Press DISP/FUNC button
again and the power
being used is displayed
in Watts (±10%).
Press DISP/FUNC button
again and the display
returns to the first
screen showing rpm.
