background image

SAFETY PRECAUTIONS

This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.

Your mower is perfectly safe if used correctly.  Failure to observe the
following precautions may result in serious injury.

Before using the mower read the owners handbook carefully. Pay par-
ticular attention to the safety precautions. Ensure that you are familiar
with the controls and the proper use of the equipment. Learn how to
stop the mower quickly in an emergency.

Never allow children or people unfamiliar with these instructions to
use the mower.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.

While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.

Thoroughly inspect the area where the mower is to be used and remove
all objects which may be thrown by the machine.

WARNING:

Petrol is highly flammable.

-  Store fuel in containers specifically designed for this purpose.

-  Add fuel before starting the engine. Never remove the cap from the

fuel tank or add petrol while the engine is running or when the engine
is hot. Allow the engine to cool for at least two minutes before refu-
elling.

- Do not attempt to start the engine if petrol is spilled or a smell of

petrol is present. Move the mower away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.

1.8

Safety Alert Symbol

Preparation

Training

111-1292 A  20/4/07  1:51 pm  Page 1.8

Содержание Hayterette 005E





































Отзывы: