hawo hd 650 DC EcoPak, Руководство по эксплуатации

Страница: 29 / 49

hd 650DC EcoPak D
Chapter 4
9.693.024 Page 29
V 1.02
Malfunction Possible cause Remedy
Uneven material feed
or loud running noise Transport belt guide
Transport belt
-damaged
-no transport
Motor Renew PTFE belt on guide rail
(see pg. 36)
Replace transport belt
Check belt tension
Replace motor*
Sealing seam will not hold
Temperature too low
Contact pressure too low
Sealing die
Distance between
the sealing dies too great Increase temperature
Readjust the contact pressure of the sealing
roller or replace the sealing roller*
Set the distance of the sealing dies
to 0.5 mm*
Sealed seam distorted Pressure applied to high Readjust the contact pressure of the sealing
roller or replace the sealing roller*
Paper side of the package is
discoloured or side fold
shrunk
Temperature too high
Reduce to temperature (see pg. 14 3.4.1)
No printing or
printing incomplete
Ink ribbon
Print head
Printer control faulty
Switching power supply faulty Ink ribbon not inserted properly
Replace ink ribbon. (see pg. 35)
Replace print head*
Replace printer control*
Replace switching power supply
Printing too faint
Ink ribbon
Print head
Paper pressure roller Replace ink ribbon.
Readjust print head*
Adjust paper pressure roller*
4.2
Customer service

Your hawo customer service team is available
from Mon - Fri 8 a.m. - 5 p.m. and
on +49 (0)6261-9770-31.
You are also welcome to send questions to the following
e-mail address: service@hawo.com