Hawking HPOW5CM, Руководство пользователя

Страница: 62 / 129

61
4-3-3 VLAN Access Point
For each Virtual AP, users can configure general settings and security. Click “edit” on the Virtual AP you
wish to edit.
ESSID: Extended Service Set ID indicates the SSID which the clients used to connect to
the VAP. ESSID will determine the service type of a client which is assigned to the
specified VAP.
SSID Visibility: Select this option to enable the SSID to broadcast in your network. When
configuring the network, it is suggested to enable this function but disable it
when the configuration is complete. With this enabled, someone could easily
obtain the SSID information with the site survey software and get unauthorized
access to a private network. With this disabled, network security is enhanced
and can prevent the SSID from begin seen on networked.
Client Isolation: Select Enable, all clients will be isolated from each other. That means all clients
cannot reach to other clients.
Connection/User Limit: Enable if you want to have a user limit. Enter maximum number of clients to a
desired number. For example, while the number of client is set to 32, only 32
clients are allowed to connect with this VAP.
IAPP: Inter Access-Point Protocol is designed for the enforcement of unique association
throughout a ESS(Extended Service Set) and for secure exchange of station's
security context between current access point (AP) and new AP during hand off