HWABN25
Hi-Gain™ Wireless-300N Multi-Function Extender Pro
www.hawkingtech.com
Technical Support
Tel: 1.888.202.3344
E-mail: [email protected]
© 2012 Hawking Technologies, Inc. All rights reserved. All trademarks herin are the property of their respective owners. Apple, Mac, iPad, and iPhone are registered trademarks of Apple Computer, Inc. No Affiliation implied or expressed.
Package Contents
• 1x Wireless-300N Multi-Function
Extender Pro
• 1x Power Adapter 5V/2A
• 1x Ceiling/Wall Mounting Bracket
• 1x Pack of Mounting Screws
• 1x Setup CD-ROM
• 1x Quick Installation Guide (QIG)
Requirements
• Wired or Wireless Internet Connection
• A Wired or Wireless Network Device (Tablet,
Smartphone, Mac or Windows Computer
• Power Outlet
• Ethernet cable
(optional, dependent on mode)
HWABN25- QIG 2012.08.29
Start Here
This Quick Installation Guide provides a quick and easy way to
set up the HWABN25 in Universal Repeater or Access Point Modes.
If you need to use the other modes, please refer to the manual
located on the CD.
i
1
Hardware Setup
2
Configuring the HWABN25
Using WiFi enabled device, access the HWABN25 setup page by searching for the
Hawking_HWABN25.
(If you are planning to configure the HWABN25 using a wired connection, please plug your computer into the port labeled “LAN”, then go straight to Step 3.)
For Mac Users
Click on the Wi-Fi icon in the
“Apple” toolbar. Click on the
“
Hawking_HWABN25
”
network
from the drop-down menu.
Then Continue to Step 3.
For Windows Users
On the lower right corner, go to
your wireless network select.
Click on
“
Hawking_HWABN25
”.
Then
Continue on to Step 3.
Using an Android device
On your mobile device, locate the
“settings” menu.
Select “Wireless & Networks”.
Click “Turn on Wi-Fi” and
then click on the “Wi-Fi
Settings” option.
Look for
“
Hawking_HWABN25
”.
Select it to connect.
Then Continue to Step 3.
Using an iPad®
or an iPhone®
Go to your wireless
setting,
select
“
Hawking_HWABN25
”
Network. Then, go to Step
3.
Make sure JavaScript is ON.
To check your settings, go to
Settings > Select Safari >
then scroll down to view
Javascript.
Hawking_HWABN25
Hawking_HWABN25
3
Login into the HWABN25
4
Choosing your Mode
In the drop down box, please
select your mode of operation
for the HWABN25. This quick
installation guide will only
outline the Universal Repeater
and Access Point modes.
For other modes and features,
please refer to the manual on
your CD.
Using the same device, open a web browser and type in the follow-
ing web address in the web address bar:
http://192.168.1.241
Once the page loads, enter
the following login information:
Login:
admin
Password:
1234
Click
Login
to continue
If the page doesn’t load, please check if JavaScript is enabled. Generally, this
should be enabled by default. However, if it’s not, please go into your Browser
Settings and enable JavaScript.
WPS/Reset Button
-WPS: Press and release to initiate WPS
-Reset to manufacturer settings: Press and hold down button
for 15 seconds. Unplug the power for a few seconds then
plug it back in for factory reset
Bottom Panel Description
Ethernet/Power over Ethernet (PoE)*
Local Area Network (LAN) port. Can also function as a
PoE port if you have a PoE power supply. (*sold
separately)
Top Panel Description
Wired Connection LED
LED is on when connected (When a ethernet cable is plugged
into the ethernet port). Blinking when wired data is
transmitting/receiving.
Wireless LED
LED is on when Wireless is activated. Blinking when
wireless data is transmitting/receiving.
Power LED
Indicator that the power is switched on and correctly
powered.
Power Plug (5V/2A)
Plug the provided A/C adapter to power on the device.
(Not used if using PoE.)
Twist base to remove the mounting bracket. Plug either the included
A/C Adapter into the port labeled 5V/2A or, if using PoE, plug a ethernet
cable into the LAN/PoE port if you have a PoE power source.
Q
uick
I
nstallation
G
uide
