HAWEKA RPV1300, Руководство по эксплуатации

Страница: 8 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
8
2.1 Authorised intended use
•
The runout measurement device RPV1300 has been developed to allow optimisation of
runout of large tractor wheels and other heavy vehicle wheels for agricultural and
earthmoving machinery.
•
It is exclusively intended for quickly measuring runout of the vehicle rim while simultaneously
measuring runout of the vehicle tyre.
•
Using the runout measurement device allows determination of the ideal positioning of the
tyre on the rim through measuring.
•
The wheel for testing has to be clamped well centred to the vehicle (tractor) or another
suitable rotation device, e.g. a mounting machine (see page 18).
•
The wheel for testing has to have a clear, countable number of tread lugs and be new or as
new.
The operator of the runout measurement device rather than the
manufacturer shall be liable for all personal injury and property damage
caused by incorrect use!
2.2 Description of the area of application:
Tolerances caused by production often cause deviations in runout of rim and tyre. These deviations
can have a negative effect on the runout of the wheel through accumulation of the tolerances,
causing the vehicle to vibrate and even “bob”.
(Vehicle vibrations)
The runout of the individual wheel is also tested and – if necessary – optimised to be able to make a
statement about this value. The laser sensors of the runout measurement device RPV1300 measure
the rim on both sides, in the area of the hump (tyre seating on the rim) and the tyre over the tread
lugs and evaluates it using the program.
The RPV1300 program uses the recorded measurement values to determine the best possible
position of the tyre in relation to the rim.
Afterwards, the smallest runout between the two components can be achieved through targeted
rotation of the tyre on the rim (matching).