HAWEKA RPV1300, Руководство по эксплуатации

Страница: 26 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
26
Measurement recording
7.7 Error during wheel measurement
•
Shifting of the laser sensors on the wheel
If the message -
Measuring value error on the first
tread lug! - appears during measurement, the program
has detected an inaccuracy to the control point from the
first tread lug.
This message can appear when one or more laser
sensors have changed their aligned position to the
wheel during measurement.
(Fig. 56)
•
When measuring steered wheels the steering has to
be blocked.
•
Check the position of the laser sensors. It is
recommended to repeat the measurement.
•
Excessive rotational speed of the wheel
If the rotational speed is exceeded only briefly during
measurement a speedometer symbol is displayed on the
right edge of the screen.
(Fig. 57)
The measurement can be continued.
If the rotational speed is exceeded for a longer period of
time the program cannot record the measured values
correctly any longer and a warning message is
displayed.
(Fig. 58)
The measurement should be restarted.
(Fig. 58)
(Fig. 57)
(Fig. 56)