HAWEKA RPV1300, Руководство по эксплуатации

Страница: 25 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
25
Measurement recording
7.6 Start wheel measurement
When:

all wheel data have been entered,

the laser sensors have been positioned
correctly and assigned to the program,

the wheel to be measured has been marked on
rim and tyre

and the wheel can be rotated freely
the wheel measurement can be started.
•
Click on “ Start measurement ” and start by rotating
the wheel evenly.
(Fig. 52)
The screen shows the number of measured tread lugs
and displays the measured values graphically.
(Fig. 53)
•
When the wheel has been moved by one full rotation
until the first tread lug was recorded a second time,
a signal can be heard and the measurement is
completed.
After the measurement the program automatically
changes to the circle diagram where the measured
values are displayed and a sector of the circle shows
how far the tyre has to be turned clockwise on the rim in
order to minimise runout in the wheel.
(Fig. 54)
Information about the evaluation is displayed under the
point
Evaluation on the screen.
Turning the tyre on the rim is called matching .
Example for an evaluation (
Fig. 55
)
(Fig. 54)
(Fig. 55)
(Fig. 52)
(Fig. 53)