AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
48
Trailers
Preparations for measuring trailers
The
camera measurement heads
may have to be con-
verted using the 265 mm long magnetic feet (similar to
trailer measurements), depending on the rim type.
(Fig. 99)
13.3 Aligning the vehicle axle on the drawbar
•
Check the drawbar for visible defects.
•
The camera measurement heads are fitted to the
vehicle wheels of the rotating axle.
•
Place the magnetic feet on both vehicle sides at the
same position on the chassis.
•
Hang the reflectors on the right and left.
•
Place the cameras onto the wheel alignment clamp
on each side of the vehicle and align against the re-
flectors on the magnetic feet.
•
Prepare the computer and select
Trailer
as vehicle
type in the program.
•
Enter the rim size.
(Fig. 100)
•
Select the
Setup scales
button.
•
Now the vehicle axle is aligned against the drawbar
until the values shown for both sides are the same.
(Fig. 101)
•
Use the parking brake to lock the vehicle wheels on
the axle.
•
End the procedure with the
Continue
" button.
(Fig. 99)
(Fig. 100)
(Fig. 101)
