AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
44
•
Finally, go back by clicking “Okay”.
•
Save your entered data by clicking the “
Accept” button
”
(Fig. 86)
The new dataset has been created and can be used.
12.2 Using the user reference database
A new symbol with a set of scales has been added
to the right side of the “
Selection
” section of the
program.
•
Start a vehicle alignment as usual.
•
To use the database, click on the scales symbol
after you have added the measured data.
(Fig. 87)
An overview opens with the vehicle data you have created.
•
Select the respective vehicle from the list and click on the
“
Load nominal data
” button.
(Fig. 88)
The NOMINAL data will be shown along with the ACTUAL
data that has been recorded.
V
ia the print button, the selected vehicle-data
can be printed out separately
•
To leave the nominal data screen and con-
tinue with measuring, click on the
Cancel
symbol on the bottom right side.
(Fig. 89)
(Fig. 86)
(Fig. 87)
(Fig. 88)
(Fig. 89)
