H 5 - F
ELECTRIC SURFBOARD
USER MANUAL
SHENZHEN HOVERSTAR FLIGHT TECHNOLOGY CO., LTD
Address:
5th Floor, Block B, Aerospace Micromotor Building, No. 25, 2nd
Kejibei Road, Nanshan District, Shenzhen, China.
Email:
Website:
www.havospark.com
Tel:
0755-33138076
10. While the surfboard leaves the water, never
let the motor work for over 1 minute in vain to
avoid incurring any damage to the motor due to
insufficient cooling.
11. Charger instructions: when it is charging, connect
the charger to the power supply, and the indicator
on the charger turns from orange to red and
finally to green. After the charger indicator light
turns green, connect the charger to the battery.
After connecting, the charger indicator light turns
red, which means it is in the charging status. The
charging time is 4-5 hours. When the charger
indicator turns to green again, it is fully charged.
figure 7
4. SURFBOARD STRUCTURE
When product problem arises, please contact the
manufacturer in time. Please do not disassemble it without
permission to avoid affecting the after-sales service.
7. After use in sea water, rinse the propulsion set with
plenty of fresh water. During the process, aim the
water flow at the sand cover and flush it with over 2
minutes (figure 7)
8. When the surfboard is not used for a long time,
please charge the battery at least once every two
months.
9. After using it in the sandy water area (or after
3 months of normal use), remove one or three
filters. Put the whole product in clean fresh water,
start and stop the motor at low speed for about 3
minutes. Then put the filter(s) back. Please see
(figure 8).
figure 6
figure 7
12. If the air bleed valve is broken, or water has
leaked into the water, stop using it immediate and
do not charge it. Place the battery in somewhere
dry and spacious.
