C-TCB-19-INST-8-05
INSTALL INSTRUCTIONS C-TCB-19
UNIVERSAL SIDE MOUNT
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-19
1
Telescoping pole assembly
CM93072-1
8
¼-20 Nylock nut
GSM30016
16
¼” Flat washer
GSM31005
8
¼-20 x ¾” Hex head bolt
GSM33001
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Determine location to mount TCB.
INSTALLATION:
1. MOUNT SUPPORT BRACKETS:
•
With location determined, mark mounting holes using
lower support bracket as template.
•
Drill ¼” holes on these marks.
•
Attach lower support bracket to desired surface using ¼-20
x ¾” hex head bolts, washers and nylock nuts.
•
Following same procedure for lower support bracket mark
and drill holes for upper support bracket.
•
Mount optional C-3090, computer-mounting platform, to
telescoping pole assembly using hardware and instructions
provided with C-3090.
Upper
Support
Bracket
Lower
Support
Bracket
Telescoping pole
assembly
