INSTALL INSTRUCTIONS C-TCB-MAK
MONITOR ADAPTER KIT
FOR USE ON ALL STRAIGHT POLED C-TCB’S
TOOLS REQUIRED:
Ratcheting wrench
Sockets - 7/16”, ½”
Combination wrenches - 7/16”, ½”
T-20 torx bit
3/16” Allen key
HARDWARE:
ITEM # QTY DESCRIPTION PART
#
1
1
Rotating TCB plate
CM93073-2
2
1
Bolt/nut
weldment
CM001491
3
1
5/16-24 Flex nut
CM86209
4
1
5/16-24 x 1” Socket head cap screw
CM86502
5
2
5/16” Belleville stainless washer
GSM31092
6
2
5/16” x 2” Fender washer
GSM31020
7
1
5/16-24 Hex jam nut
GSM30070
8
1
5/16-18 nylock nut
GSM30017
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
#2
#3, 4, 5, 6, 7
#1
Straight inner
pole assembly
#5, 8
