background image

 

 

INSTALLATION INSTRUCTIONS for KK-C-VAK 

CHEVROLET VAN REAR AIR VENT ADAPTER KIT 

 

TOOLS REQUIRED

:

 

Screw Driver Set 
Ratcheting Wrench Set 
Standard Socket Set 

Power Drill 
Drill Bit Set 
Safety Goggles

 

 
HARDWARE / COMPONENTS: 
 

QTY  DESCRIPTION 

PART # 

 

Heat/Cool Adaptor box assembly 

KKM01152 

 

Chevy Heat/Cool Box mounting channel 

KKM01147 

 

Chevy Rear Air Hose Adapter  

KKM01148 

 

10 

Hose Clamps 3” 

GSM20045 

 

4” Hose Clamps  

GSM20042 

      1          4” Diameter Hose                                                             GSM40100 
 

Vent cover w/ hose adapter assembly 

KKM0403-001 

 

1          2 ½” “Y” Duct Connector                                         

PRM97483 

  

1          2 ½” Air Duct Hose      8 foot length                        

PRM97475 

      1          2 ½” Air Duct Hose      7 foot length                       

PRM97475     

      1          2 ½” Air Duct Hose      6 foot length                       

PRM97475 

      2          2 ½” Air Duct Hose      4 foot length                        

PRM97475  

      20 

#10 X ¾” Sheet Metal Screws 

GSM33195 

 

20 

#10 Star Washers 

GSM31034 

      20        #10 x ¾” Flat Head Sheet Metal Screws 

GSM34151 

      20 

15” Wire Tie 

GSM20036 

                                                                                                     

 

 

 
 
 
 
 
 
 
 
 
 
 
 

Содержание Chevrolet Van Rear Air Vent Adapter Kit KK-C-VAK

Страница 1: ...channel KKM01147 1 Chevy Rear Air Hose Adapter KKM01148 10 Hose Clamps 3 GSM20045 2 4 Hose Clamps GSM20042 1 4 Diameter Hose GSM40100 4 Vent cover w hose adapter assembly KKM0403 001 1 2 Y Duct Connector PRM97483 1 2 Air Duct Hose 8 foot length PRM97475 1 2 Air Duct Hose 7 foot length PRM97475 1 2 Air Duct Hose 6 foot length PRM97475 2 2 Air Duct Hose 4 foot length PRM97475 20 10 X Sheet Metal Scr...

Страница 2: ...rough the hoses prior to installation of Kwik Kit unit SUBASSEMBLY 1 Remove all necessary parts from shipping packages and verify parts 2 Remove AC and Heat plastic vents from OEM HVAC blower ducts 3 If vehicle has full rear trim you must remove trim panels around the OEM HVAC unit including ductwork headliner NOTE The front portion of headliner can be cut off and reused as front ceiling trim afte...

Страница 3: ...h hoses for permanent mounting Attach the Y duct hose adaptor to the 8 foot front duct hose and connect both 4 foot hoses from Y to vents in driver and passenger side front ceiling This will provide a total of four ceiling vents Route hose straight up from the HVAC unit and tie tight to corner of the van When routing the hoses tie together using 15 wire ties to keep a neat and tight fit to the wal...

Страница 4: ...ing 8 x 3 8 flat head sheet metal screws Screws included with standard Kwik Kit hardware After Aluminum insert is installed and tested attach cover plate to bench wall to cover OEM Rear AC Heat Unit using 10 Sheet metal screws Check that airflow through hoses is working properly With hoses routed to locations proceed to install Kwik Kit unit until you come to the ceiling instructions Be sure not t...

Отзывы: