4
INSTALL INSTRUCTIONS C-VS-1300-TBZ
VEHICLE SPECIFIC CONSOLE
2006-2008 CHEVROLET TRAILBLAZER
TOOLS REQUIRED:
Phillips screwdriver
T-15 Torx driver
T-20 Torx driver
7/16 wrench
Ratchet wrench
7/16” socket
15mm socket
Jig Saw or plastic cutting tool
Eye goggles
HARDWARE:
QTY DESCRIPTION PART
#
1 Trailblazer
vehicle
specific console
C-VS-1300-TBZ-H
1 Bail
bracket
C-B1
1 Rear hump bracket set
C-B27
1 Duct block off plate
CM001516
2 Side “L” brackets
CM93594
1 Console hardware kit
C-HK
1 Torx
screw
kit
C-HK-1
1 #10x1/2 PPHSMS (Block off plate screw)
GSM33194
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Disconnect the vehicle battery. Removing seat bolts on some vehicles may give the vehicles
computer a false reading, causing a warning light on the instrument cluster. This requires the
vehicles’ computer to be reset with a vehicle diagnostics tool.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use only hardware provided with install kit.
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
or call
1-800-524-9900 and ask for technical support.
