Haverland Wi SmartWave, Инструкция по установке и эксплуатации

Страница: 29 / 36

1
Introduction
1.1 Description
The Wi is a new range heater employing that
incorporates the smart i2Control thermostat.
1.2 Characteristics
• i2Control auto-programmable thermostat. You do
not have to programme your heater. The unit will do it
for you automatically.
• Its presence sensor and algorithms continually
monitor your life style habits and controls your
electricity consumption at all times, especially your
comfort.
• It has three operating modes, “learning”, sensor and
manual.
• Open window detection. If you leave a window
open, the unit will switch itself off to prevent energy
wastage.
• The keyboard in touch sensitive.
1.3 Panel controls / Screen
Description :
1. Sensor
2. Temperature indicator
- Red = Comfort
- Blue = Anti-frost
- Green = Economy
3. Operating mode indicator:
- Flashing = “Learning” mode
- Fixed = Sensor mode
- Off = Manual mode or “Forced” program-
ming mode (via Smartbox App (not included)).
4. “Forced” programming mode (via Smartbox App
(not included)).
5. Sensor indicator
6. Heating On
7. Increase
8. Decrease
9. Screen:
- Ambient temperature
- Selected temperature
- Clock and day
9. Standby
2
Installation
2.1 Regulations:
• It is essential that the heater IS FIRMLY FIXED TO
A FIRM WALL AND LEVELLED.
• In order to optimize presence detection of your
heater, do not install it in a “dead” angle or behind a
piece of furniture.
• The heater must never be installed just below a
mains socket.
2.2 Safety measures:
50 cm
15 cm
5 m
• Take into account the heater
location so that it can detect
presence over the largest possible
area of the room.
• The presence sensor will not
detect any movement if the distance
to the heater exceeds fi ve metres.
• Remember that the sensor will
detect the movement of pets.
• DO NOT PLACE ANY OBJECTS
IN FRONT OF OR ANYWHERE
NEAR THE SENSOR.
Page 29
1
2
3
4
6
7
10
8
9
5