19
ENGLISH
!
WARNING!
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
ADDITIONAL SAFETY WARNINGS
16. When removing the bit from the tool avoid contact with skin and use
proper protective gloves when grasping the bit or accessory.
Accessories may be hot after prolonged use.
17. Check to see that keys and adjusting wrenches are removed from the
drill before switching the tool “ON”.
Keys or wrenches can fly away at high
velocity striking you or a bystander.
18. Do not run the drill while carrying it at your side.
The spinning drill bit
may become entangled with clothing and injury may result.
1) Lead from lead-based paints.
2) Crystalline silica from bricks and cement and other masonry products
3) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, and work with
approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
APPLICATION
Read all safety warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Intended Use
The power tool is intended for impact drilling into concrete, brick and stone and is
also suitable for drilling into wood, metal and plastics. The tool can be used with
screwdriver bits to install and remove screws and can also be used with a whisk to
mix paints and driveway sealers etc..
Check the delivery parts
Carefully remove the tool from its packaging and check if the following parts
are complete:
-- 2 gears impact drill
-- Auxiliary handle
If any parts are missing or damaged, please contact Customer service at the
number indicated on the front page of this manual.
Product Features
The numbering of the product features refers to the illustration of the tool on
the graphics page. (See figure A)
1. Rotational direction switch
2. Lock-on button
3. On/Off switch
4. Drill/hammer drill selector switch
5. Gear change selector switch
6. Depth gauge
7. Keyless chuck
8. Auxiliary handle
Содержание 59595003
Страница 2: ...A 1 ...
