53
4001015340
E 12.18
USA / GB
Control-Filling-up
Oil tank
M001
Control-Filling-up
Oil tank
1 - You will need
2 - Preliminary procedure
1.
Place the machine in maintenance configuration.
3.3.1-Placing the machine in maintenance con-
figuration
3 - Control
The oil level ( 1 ) must be between the upper and lower markers .
4 - Filling-up
5 - Additional operation
1.
Place the machine in its operating configuration.
3.3.2-Placing in operating configuration
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the work area
Check the oil level when cold (before beginning a new period of work).
If the oil level ( 1 ) is not visible :
1.
Loosen and remove the tank cap ( 2 ).
2.
Top up the oil level.
3.
Refit and tighten the tank cap .
Содержание H12SX
