Haulotte H12SX, Книга по эксплуатации

Страница: 17 / 128

17 4001015340 E 12.18 USA / GB
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL -
H18 SX - HS5388 RT - H18 SXL
B
- Safety
3 - Manufacturer's warranty
3.1 - W
ARRANTY ACCEPTANCE
On reception of his machine, the owner or rental company must check the machine's condition and fill
out the machine reception slip provided.
3.2 - W
ARRANTY PERIOD
The present warranty is valid for a period of 12 months or up to a maximum of 1000 operating hours
for personnel lifting machines and 12 months or up to a maximum of 1500 operating hours for the other
machines, including MJX or the Telescopic Handlers, starting from delivery and terminating when the
first limit is reached.
Spare parts are covered by a 6 month warranty.
3.3 - C
ONDITIONS OF WARRANTY
HAULOTTE® guarantees its products against defects, faults or manufacturing defects when the owner
or rental company has informed HAULOTTE® of the defect.
The warranty does not cover the consequences of normal wear, nor any defects, failure or damage
resulting from poor maintenance or abnormal usage, in particular overloading, impact by an external
source, faulty installation or any modification made to products marketed by HAULOTTE® and
performed by the owner or rental company.
In the event of operation or use which does not comply with the instructions or recommendations in the
maintenance book, warranty claims will not be accepted.
The machine utilisation period must be recorded by reading the engine hour meter whenever an
intervention is made. The engine hour meter must be maintained in good working order to guarantee
maximum working life and to justify maintenance at the recommended time.
Warranty obligations for the time period stated above will cease immediately in situations where the
defect is due to the following reasons :
• Use of spare parts that are not HAULOTTE® originals.
• If elements or products other than those recommended by the manufacturer are used.
• If the HAULOTTE® name, serial numbers or identification marks are removed or altered.
• After an unreasonably long delay before reporting a manufacturing problem.
• If the owner or rental company continues to use the machine despite problems.
• If damage is caused by modifications that do not comply with HAULOTTE® specifications.
• If lubricants, hydraulic oils or fuels that do not comply with HAULOTTE® recommendations are used.